Seat Height Adjuster, Removing and Installing

Seat Height Adjuster, Removing And Installing

NOTE: Removal and installation is described for left seat. same instructions apply for removal and installation for right seat.

Removing
- Remove seat.

NOTE: Before removing, seat must be brought to highest position in order to release tension on tension springs for height adjustment to greatest extent.

- Remove bolt - 2 - and unclip trim - 1 -.
- Unclip two cover caps - 11 -, remove two bolts - 12 - and remove adjusting lever - 13 -.







- Remove bolt - 17 - and unclip trim - 14 -.







- Carefully unhook tension spring - 2 -.







- Remove bolts - arrows - (10 Nm) and pull seat height adjuster - 1 - out of seat frame.







Installing
Installation is reverse of removal.

NOTE: Tightening torque for bolts - arrows - is 10 Nm (7 ft lb).