Selector Lever Handle Removing and Installing

Removing and installing selector lever handle
Removing
- Shift selector lever to position "R".





- Slide sleeve -1- downward.
- Pull button -2- out of handle -3- just enough so that pull lever-arrow- hangs down.
- Pull handle off selector lever.

Installing
- Shift selector lever to position "R".





- Pull button -2- out of handle -3- just enough so that pull lever -arrow- hangs downward.
- Press handle on selector lever onto stop.
Installation position: Button points to driver.
- Pull button out slightly and guide pull lever -arrow- into handle.
- Press button so that pull lever engages in pull rod -4-.
Button must now spring back onto stop.
- Slide sleeve -1- upward in twisting motion until two wide tabs of sleeve locate in slots of handle and sleeve can be felt to engage in handle.
- Set selector lever in position "P".