Air Cleaner Housing: Service and Repair

Air cleaner, disassembling and assembling





Engines: AEG, AVH, AZG, BBW, BEV

1. Connector
^ Black, 2-pin
^ For Positive Crankcase Ventilation (PVC) heating element -N79
^ Check heater element voltage supply between contacts 1 and 2 with engine running, Specification: m in. 11. 5 V
2. Intake hose
^ With Positive Crankcase Ventilation (PVC) heating element -N79
3. Mass Air Flow (MAF) sensor -G70-
4. 5-pin Connector
^ Black
^ Contacts gold plated
5. Seal
^ Replace if damaged
6. Air cleaner upper part
7. Air duct
^ Clipped into air cleaner upper part
8. 6 Nm
9. Filter element
10. Air cleaner lower section
11. Air duct
12. 10 Nm
13. O-ring
^ Replace if damaged
14. Intake hose
15. Connecting hose
^ Engines: AEG, AVH, AZG
^ To air line for air shroud injectors
16. Connecting hose
^ Engine: BBW
^ To air line for air shroud injectors
17. Connecting hose
^ For crankcase breather
^ To cylinder head breather housing
^ Engine: BBW: Do not separate from intake hose item -2-
18. Connecting hose
^ To connecting pipe on intake manifold upper section
19. To throttle valve control module -J338