Parts of EVAP Canister System, Removing and Installing

Parts Of EVAP Canister System, Removing And Installing







1 Seal
- Replace if damaged
2 Vent line
- white
- Check for secure fitting
- To disengage, squeeze together at front
3 Vent line
- white
- Check for secure fitting
- To disengage, squeeze together at front
4 Mounting screw
5 Connection hose
- Pressure side
- Check for secure fitting
6 Connector
- black, 3-pin
7 Vacuum line
8 Leak Detection Pump (LDP) -V144-*
- Under wheel housing liner in rear right wheel housing
9 Air filter for diagnostic pump
10 Connection hose
- Intake side
- Check for secure fitting
11 Bracket
12 10 Nm
13 EVAP canister
- Under wheel housing liner in rear right wheel housing