Fuel Delivery and Air Induction: Service and Repair

Fuel supply system components, removing and installing

Note:
^ Hose connections are secured with either spring-type or clamp-type clips.
^ Always replace clamp-type clips with springtype clips.
^ Fuel hoses of engine must only be secured with spring-type clips. The use of clamp or screw type clips is not permitted.





^ Fuel pump unit VAS 5190 is recommended for emptying the fuel tank.

Engine: BBW
Contrary to the operating instructions the draining must not occur via the filler neck in this engine/vehicle or inner components will be damaged. Empty the fuel tank only via the open flange.





Continue for all engines

^ Assembly tool VAS 5024 or hose clip pliers V.A.G. 1921 are recommended for installing spring-type clips.
Refer to safety precautions
Refer to rules for cleanliness