Steering Column: Locations

Steering column, identification





From vehicle identity No. 1J-XB 095 035 a steering column from Presta was introduced.

The previous steering column from Nacam is also used.
The function of the height and reach adjustment is identical in both steering columns.

Both versions are supplied as spare parts.
When replacing a steering column, use a steering column from the same manufacturer.

Before removing the steering column, check which version is installed in the vehicle.





Identifying steering columns
A - Steering column
Manufacturer; Nacam
1 - Transportation securing device
^ Remove first after steering column is installed
2 - Steering column
3 - Steering column universal joint/shaft
4 - Hex head bolt, 22 Nm (16.2 ft. lbs.)
^ Installed without locking fluid
B - Steering column
Manufacturer; Presta
1 - Transportation securing device
^ Remove first after steering column is installed
2 - Steering column
The lower part of the steering column is visible
3 - Steering column universal joint/shaft
4 - Hex head bolt, 22 Nm (16.2 ft. lbs.)
^ Inserted with locking fluid
^ Use locking fluid D 000 600