Intake Manifold Upper Part, Disassembling and Assembling - I

Intake Manifold Upper Part, Disassembling And Assembling (Engine codes BBW, BEV)







1. Intake manifold upper part
2. 6 Nm
3. Rubber bushing
- For engine cover
4. From fuel system Leak Detection Pump (LDP) -V144-
5. From Evaporative Emissions canister purge regulator valve -N80-
6. 10 Nm
7. Connecting pipe
8. To brake servo vacuum line
9. 25 Nm
10. Seal
- Always replace
11. To intake hose
12. Coolant hose connection diagram
13. Throttle valve control module -J338-
- If replaced adapt (match) engine control module.
- Connector contacts are gold plated
14. Seal
- Always replace
- Observe installation position
15. Union
- To cylinder head cover or intake specially formed hose