Intake Manifold Upper Part, Disassembling and Assembling - II

Intake Manifold Upper Part, Disassembling And Assembling (vehicles With Engine Code BBW, BEV)







NOTE:
- To prevent damage to catalytic converter the fuel system (without return hose to fuel rail) must be bled after repair work on fuel lines or on fuel filter.
- The vehicle must only be started after bleeding.
- Bleed fuel system.

1. Upper section of intake manifold
2. 6 Nm
3. Rubber bushing
- For engine cover
4. From the Leak Detection Pump (LDP) -V144-
5. From Evaporative Emission (EVAP) canister purge regulator valve -N80-
6. 10 Nm
7. Connection tube
8. To vacuum line, brake booster
9. 25 Nm
10. Gasket
- Always replace
11. To intake hose
12. Connections for coolant hoses
13. Throttle valve control module -J338-*
- Terminals of sensor and connector are gold-plated
14. Gasket
- Always replace
15. Connecting piece
- To molded hose for cylinder head cover or intake hose.