Multi-Pin Connector With Contact Assignment

Multi-pin connector with contact assignment

Note: All contacts not listed are currently not assigned and must never be connected to other components!





Contact assignment of connectors for voltage supply and On Board Diagnostic (OBD) with V.A.G 1551 Scan Tool
Contact 4 = Ground (terminal 31)
Contact 16 = Positive (terminal 30) to S12
Contact 7 = K wire to contact 7 of multi-pin connector T25 of ABS control module (w/EDL) -J104





Contact assignment of connector T25 wiring harness/ABS control module (w/EDL) -J104








Wiring Connection to Component