Sunroof With Glass Panel (Webasto)

Sunroof With Glass Panel, Assembly Overview







1 Glass panel for sunroof (single pane safety glass)
- Removing glass panel for sunroof
- Installing glass panel for sunroof
- Adjusting glass panel for sunroof
2 Panel seal
- Panel seal, replacing
3 Sliding headliner
- Removing and installing Sliding headliner
4 Slider
5 Lower trim
- Vehicles up to calendar week 35 2002 (CW 35/02)
6 Upper trim
- Vehicles up to calendar week 35 2002 (CW 35/02)
7 Water channel
- Removed together with slotted guide rail
8 End piece
- Use Butyl adhesive sealing cord AKL 450 005 05 for sealing
9 Bolt
- 3.5 Nm
10 Installation unit
- Removing installation unit 60-2, Installation unit, removing and installing
- U-frame (with guide channels), if necessary use special grease G 000 450 02 exclusively to grease guide channels, otherwise functions cannot be guaranteed.
11 Drive motor
- Adjusting drive motor (zero position)
12 Bolt
- 3.5 Nm
13 Hex wrench for emergency operation
- Clipped in on drive motor cover
14 Cover
15 Spring
16 Wind deflector
17 Wind deflector mounting
18 Torx screw
- Torx T25
- 4.5 Nm
19 Slotted guide rail
20 Guide with cable
21 Carriage for water channel
22 Countersunk screws (microencapsulated)
- Always use new countersunk screws
- 3.5 Nm
23 Trim pieces
- Vehicles from calendar week 36 2002 (CW 36/02) on

NOTE: Trim pieces and trim must not be swapped with each other during replacement. Clearance for mechanical components is otherwise not guaranteed.