Exhaust System: Adjustments

Aligning Exhaust System

Recommended special tools and equipment
- Hex bolt M10 x 80







- To align the exhaust system, prepare a special tool from a hex bolt M10 x 80 to the specified dimensions:
- dimension x = 4 mm
- dimension y = 25 mm

Procedure

NOTE:
- A second person is required for aligning the exhaust system.
- Align exhaust system when cold.
- The exhaust system is pretensioned in direction of travel with special tool inserted.

- Remove bolts at double clamp, item 4.







- Slide exhaust system as far in the direction of travel until the manufactured special tool can be inserted vertically through rear hole of tunnel bridge (arrow).

Flat side of special tool points to mounting bolts of exhaust system.







- Position new double clamp as shown with approx. 5 mm distance to marking -A-and tighten it.
Tightening torque 40 Nm

NOTE: Marking -A-is valid for vehicles with manual and automatic transmission.