Parts of EVAP Canister System, Removing and Installing

Parts Of EVAP Canister System, Removing And Installing (Vehicles With Engine Code BDF)







1 Vent line
- white
- Check for secure fitting
- To disengage, squeeze together at front
- To pressure retaining valve, item 7
2 Seal
- Replace if damaged
3 Vent line
- Black
- Check for secure fitting
- To change-over valve, item 11
4 Connection piece
5 Connector
- black, 3-pin
6 Vacuum line
- to intake manifold, item 4
7 Leak detection pump (LDP) -V144-*
- Under wheel housing liner in rear right wheel housing
8 Connection hose
- Pressure side
9 3 Nm
10 Air filter for diagnostic pump
11 Connection hose
- Intake side
12 Bracket
13 10 Nm
14 EVAP canister
- Under wheel housing liner in rear right wheel housing.