Camshaft Bearing

A - Intake camshaft
- Tighten bearing caps 5 and 9 alternately and diagonally to
5 Nm and 1/8 turn (45°)
- Install bearing caps 1 and 13 and tighten to
5 Nm and 1/8 turn (45°)
- Install bearing cap 7 and tighten to
5 Nm and 1/8 turn (45°)
- Install bearing caps 3 and 11 and tighten to
5 Nm and 1/8 turn (45°)





B - Exhaust camshaft
- Tighten bearing caps 6 and 10 alternately and diagonally to
5 Nm and 1/8 turn (45°)
- Install bearing caps 2 and 14 and tighten to
5 Nm and 1/turn (45°)
- Install bearing cap 8 and tighten to
5 Nm and 1/8 turn (45°)
- Install bearing caps 4 and 12 and tighten to
5 Nm and 1/8 turn (45°)
- Position camshafts in cylinder head to TDC No. 1 cylinder.