Fuel Tank With Attachments

Fuel tank with attachments

Note: After completing repairs on the fuel delivery unit and/or the fuel gauge, ensure that the fuel supply and fuel return lines do not touch the fuel tank (transfer of pump noises).

1. Sealing cap
2. Seal
3. Securing bolt
4. Tank flap unit
5. Ground connection
6. O-ring
7. Breather valve
8. 10 Nm
9. Breather line
10. Clamping washer
11. Heatshield
12. Fuel tank cover
13. Fuel tank cover
14. 25 Nm
15. Securing strap
16. Fuel tank
17. Seal
^ Replace if damaged
18. Fuel delivery unit
19. Union nut
20. Supply line
21. Return hose
22. Gravity/overflow valve
^ To remove valve unclip upward out of support
^ Check valve for through-flow, valve vertical- open, valve tilted 45° closed
23. Angle piece





^ Installed position of fuel delivery unit flange
^ Mark on flange must align with mark on fuel tank - arrows -
^ Return line "l " (blue or with blue marking) to connection marked "R".
^ Black supply pipe "2" to connection marked "V".





Note: After installing fuel delivery unit flange, check that the supply, return and breather lines are still clipped onto the fuel tank.

Checking breather valve
Lever in rest position- Closed
Lever pushed in direction of arrow- Open

Note: Before installing breather valve, unscrew filler cap from fuel tank.