Vehicle Damage Warnings

Rules for cleanliness
When working on the fuel supply/injection system, pay careful attention to the following "6 rules" -.
^ Thoroughly clean all unions and adjacent areas before disconnecting.
^ Place removed parts on a clean surface and cover. Do not use fluffy cloths!
^ Carefully cover opened components or seal if repairs cannot be performed immediately.
^ Only install clean components- Only unpack replacement parts immediately prior to installation. Do not use parts that have not been stored in their packing (e.g. in tool boxes etc.).
^ When the system is open- Do not work with compressed air if this can be avoided. Do not move vehicle unless absolutely necessary.
^ Also ensure that no diesel fuel contacts the coolant hoses. If necessary hoses must be cleaned immediately. Affected hoses must be replaced.