EVAP Canister System Components, Removing and Installing

EVAP Canister System Components, Removing And Installing (vehicles With Engine Code AVH, BEV)







1. Seal
- Replace if damaged
2. Ventilation line
- White
- Check for secure seating
- To disengage, squeeze together at front
3. Ventilation line
- White
- Check for secure seating
- To disengage, squeeze together at front
4. Mounting screw
5. Connection hose
- Pressure side
- Check for secure seating
6. Connector
- Black, 3-pin
7. Vacuum line
- Check for secure seating
Vehicles with engine code AEG, AVH, AZG
- To upper part of intake manifold
Vehicles with engine code BEV
- To upper part of intake manifold
8. Leak Detection Pump (LDP) -V144-*
- Under wheelhousing liner in rear right wheelhousing
9. Air filter for leak detection pump
10. Connection hose
- Intake side
- Check for secure seating
11. Bracket
- To remove, pull forward in area of locking mechanism (center) and slide bracket downward
12. 10 Nm
13. EVAP canister
- Under wheelhousing liner in rear right wheelhousing