Steering: Testing and Inspection

Connecting VAS 5051 and selecting functions
Special tools, testers and auxiliary items required





^ Vehicle Diagnosis, Testing and Information System VAS 5051
^ Diagnostic cable VAS 5051/1 or VAS 5051/3





Caution:
^ During a test drive, the testing and measuring equipment must be secured on the rear seat.
^ When vehicle is being driven, a second technician must operate this equipment.

- Pull cover -1- off in direction of - arrow - .





- With ignition switched off, connect tester VAS 5051 to Data Link Connector using diagnosis cable VAS 5051/1 or VAS 5051/3.
- Connect VAS 5051 Vehicle Diagnosis, Testing and Information System - arrow - .
- The testing and information system is ready to be used when it shows a vehicle on the screen.
- Switch on ignition.
- Press button/field on display for "Guided Fault Finding".
- Select one after another:
^ Brand
^ Type
^ Model year
^ Version
^ Engine code
- Confirm data entered.

Note: Wait until the vehicle diagnosis, testing and information system has checked all the available control modules in vehicle.

- Press Go to button and select"Function/component selection" function"

Note: Now follow the instructions given on screen to start the desired functions.