Antilock Brakes / Traction Control Systems: Locations

Electrical/Electronic components and installing locations
1. ABS hydraulic unit -N55
^ Located on left of engine compartment.
^ The ABS hydraulic pump -V64- and the inlet/outlet valves in the hydraulic unit are checked by On Board Diagnostic (OBD)
^ The ABS hydraulic pump -V64- and valve block must not be separated from one another
2. ABS Control Module (w/EDL) -J104
3. Brake light switch -F
4. Sender for rotation rate -G202
5. Sensor for transverse acceleration -G200
6. ESP-Sensor unit -G419-,vehicles from my 12.01
7. Brake system vacuum pump -V192
8. Brake booster
9. Steering angle sensor -G85
10. Sender 1 for brake booster -G201
11. Warning light for brake system -K118
12. ABS warning light -K47
13. Right/left rear ABS wheel speed sensor - G440-/-G46
^ Tightening torque of bolt: 10 Nm (7 4 ft. lbs.)
14. ESP control lamp -K155
15. Wheel hub with rotor for speed sensors
16. Wheel hub with rotor for speed sensors
17. Right/left front ABS wheel speed sensor G45-/-G47
18. Data Link Connector (DLC)