Test Step 10

Test Step 10

Notes on test table
^ The socket designations of adapter V.A.G 1598/36 are identical to the ABS control module (w/EDL) -J104- contact designations in wiring diagram.
^ If the readings obtained deviate from the specifications, carry out malfunction repair measure in the right-hand part of the table.
^ Continuity checks with adapter set V.A.G 1594 A (bridging).
^ If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G 000 700 04 ) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10 Ohms, repeat resistance check on the component.