Charge Air Intercooler & Air Ducting

Charge air cooling components, removing and installing

Note: All hose connections secured by clamps.
Charge air system must be free of leaks.
When installing observe markings on hoses and components.
Observe installed position of heat protection mats






1. Air ducting
Clip in at charge air cooler

2. 10 Nm

3. Charge Air Pressure Sensor -G31-

4. O-ring
Always replace

5. Rubber grommet
With sleeve

6. 10 Nm

7. Intake hose
Between intake manifold and charge air cooler

8. Heat protection mat
Must enclose upper hose clamp

9. Screw-type clip
Only vehicles with engine code APH
Vehicles with engine codes AWP, AWV, with quick release connection (with O-ring and securing brace)

10. Connecting pipe/hose
Between upper and lower air guiding ducts

11. Air duct
12. Bracket
13. Connecting pipe/hose

14. Charge air cooler
Installation location: in front of wheelhousing, right front