Vehicle Damage Warnings

Rules of cleanliness

When working on the fuel supply or fuel injection systems, the following "5 rules of cleanliness" should be carefully observed:
- Thoroughly clean all connections and the surrounding area before disconnecting.
- Place parts that have been removed on a clean surface and cover them. Use lint-free cloths only.
- Carefully cover over opened components or seal, if repairs are not performed immediately.
- Only install clean components:Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (in tool boxes etc.)
- When the system is open:Avoid working with compressed air. Do not move vehicle unless absolutely necessary.