Transmission Housing and Selector Mechanism, Remove and Install

Transmission housing and selector mechanism, removing and installing





1- Countersunk head bolt, 25 Nm
2- Flanged shaft with spring
3- Back-up light switch, 20 Nm
4- Oil seal
^ Always replace
5- Oil drain plug, 30 Nm
^ Always replace
6- Oil seal
^ Always replace
7- Cover plate
8- Hex bolt, 20 Nm
^ Always replace
9- Hex bolt, 20 Nm
^ For selector shaft-item
14- to cover plate
^ Always replace
10- O-ring
^ Always replace
^ Insert in groove in cover plate
11- Locking bolt, 15 Nm
^ For selector shaft gate
^ Always replace
^ Insert with locking fluid D 000 600 A2
12- Hex bolt, 25 Nm and turn 45° further
^ With attached washer
^ Always replace
13- Hex bolt, 25 Nm and turn 45° further
^ Without washer
^ Always replace
14- Selector shaft
15- Hex bolt, 20 Nm
^ Always replace
16- Selector mechanism cover
17- Clutch housing
18- Transmission housing