Diesel MFI Pump: Locations

Diesel direct injection system, component locations overview
The components A to C are not shown on the illustration.





A. Brake Pedal Switch (cruise control/Diesel Direct Fuel Injection) -F47-
^ In footwell on brake pedal
B. Brake light switch -F-
^ In footwell on brake pedal
C. Throttle Position (TP) sensor -G79-
^ In footwell on accelerator pedal

1. Engine Coolant Temperature (ECT) sensor -G62-
^ For engine control module.
^ With Engine Coolant Temperature (ECT) Sensor -G2-
^ If necessary, release pressure in cooling system before removing.
2. Intake manifold flap
^ With Motor for intake flap -V157-
3. EGR Vacuum Regulator Solenoid Valve -N18-
4. Positive Crankcase Ventilation (PCV) Heating Element -N79-
5. Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-
^ With Barometric Pressure (BARD) Sensor -F96-
6. Intake Manifold Runner Control (IMRC) Valve -N316-
7. Exhaust Gas Recirculation (EGR) Cooler Switch-over Valve -N345
8. Wastegate Bypass Regulator Valve -N75-
9. Mass Air Flow (MAP) Sensor -G70-
10. Connector
^ For injector unit (-N240- to -243-)
11. Engine Speed (RPM) Sensor -G28-
12. Fuel Temperature Sensor -G81-
13. Connector
^ For Engine Speed (RPM) Sensor-G28
14. Connector
^ For Camshaft Position (CMP) Sensor -G40-.
15. Camshaft Position (CMP) Sensor -G40-
^ For camshaft position
16. Manifold Absolute Pressure (MAP) Sensor -G71- with Intake Air Temperature (IAT) Sensor -G72