Removal and Replacement

Sensor for transmission RPM -G182- / Transmission Fluid Temperature Sensor-G93-, removing and installing

Special tools and equipment





^ VAG 1306 Drip tray





^ VAG 1331 Torque wrench

Removing





- Unscrew bolt -B-.
- Remove Sensor for transmission RPM -A- together with wiring out from transmissions.

Installing
Installation is carried out in reverse order. Note the following:
- Moisten Sensor for transmission RPM -A- with gear oil and put it into transmission side opening.
- Tighten new bolt (M6) -B- to 10 Nm.
- Install Mechatronic