Lighting - Front Turn Signals Flash Too fast

Condition
Front Turn Signal, Replacing Bulb Socket

Front Turn signal flashes too fast.





94 06 10 Sept. 27, 2006 2005570 Supersedes T.B. Group 94 number 03-05 dated December 4, 2003 due to inclusion into ElsaWeb.

Technical Background
May be caused by socket terminals not contacting the bulb.

Production Solution
Socket contact verified beginning VIN: 3VWCD31Y44M318470.

Service
- Remove inoperative light, See Repair Manual Group 94, Electrical Equipment, Light Switches - Exterior. - Check bulb. If bulb is not OK:
- Replace bulb.

If bulb is OK:
- Check for voltage signal (Ground and Power) to socket.

If voltage signal to socket is not OK:
- Continue diagnosis using appropriate wiring diagram to find source of condition.

If voltage signal to socket is OK:
- Replace front turn signal bulb socket with Part No: 7D0953123A.

Tip: Part number(s) are for reference only. Always see ETKA for the latest part(s) information.





Warranty

Required Parts and Tools
No Special Parts required. Always see ETKA for the latest part(s) information.

No Special Tools required.