Components Overview

Components overview





1. Oil pan
2. Bolt
^ Always replace.
^ 5x for attaching oil pan with oil pan gasket to transmission housing
^ Torque setting 10 Nm
3. Seal
4. Bolt 5 Nm plus an additional 90° (1/4 turn)
^ Always replace.
^ For attaching Mechatronic to the transmission housing
5. Mechatronic
6. Breather tube
^ Pressed into transmission - replace after removing
7. Breather cap
^ Attached to breather tube
8. Gear oil cooler
9. Bolt
^ 20 Nm plus an additional 90° (1/4 turn)
^ Always replace.
^ For attaching gear oil cooler to the transmission housing
10. O-ring
^ Always replace.
11. Support bracket
12. Bolt
^ 20 Nm plus an additional 90° (1/4 turn)
^ Always replace.
^ 2x for attaching support bracket to transmission housing
13. Filter housing
^ Tightening torque for attachment to transmission: 20 Nm
14. Gear oil filter
15. Gear oil pump
16. Bolt
^ 5 Nm plus an additional 90° (1/4 turn)
^ Always replace.
^ 4x for attaching gear oil pump to transmission housing
17. Gear oil pump cover
18. Bolt, 8 Nm
^ Always replace.
^ 4x for attaching cover to transmission housing
19. Drain plug M24
^ Tightening torque: 45 Nm
20. Oil seal
^ Always replace.
21. Control bolt M24
^ Tightening torque: 45 Nm
22. Oil seal
^ Always replace.
23. Overflow pipe
^ Tightening torque: 3 Nm
24. Protective plate
25. Bolt
^ 4x for attaching protective plate to transmission housing
^ Tightening torque: 32 Nm





A - Sensor for transmission RPM -G182-, and Transmission Fluid Temperature Sensor-G93