Exhaust System: Service and Repair

Exhaust system components, removing and installing

Note:
^ After working on the exhaust system ensure that the system is not under stress, and that it has sufficient clearance to the bodywork. If necessary, loosen double clamp(s) and align muffler and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded.
^ Replace self-locking nuts.

Special tools, equipment, testers, measuring instruments and auxiliary items required





^ 3337 Ring spanner for oxygen sensor
^ VAG1331 Torque wrench (5...50 Nm)
^ VAG1332 Torque wrench (40...20 Nm)