Output Diagnostic Test Mode (DTM)

Output Diagnostic Test Mode (DTM) (function 03)

When airbags are ignited the central locking is switched to "unlock", the interior lights are switched "on" and the engine (gasoline engines only) is switched off. In the convertible additionally the Automatic Rollover Supports(TM) is raised.

The function "Crash output" is checked with the standard Output Diagnostic Test Mode (DTM).

With the extended Output Diagnostic Test Mode (DTM) the raising of the Automatic Rollover Supports(TM) (convertible) are also checked.

NOTE:
- The Output Diagnostic Test Mode (DTM) must be carried out when the vehicle is stationary.
- The extended Output Diagnostic Test Mode (DTM) (convertible) must only be carried out for special reasons (e.g. as servicing point during an inspection).
- During the extended Output Diagnostic Test Mode (DTM) the convertible top must be open.
- If the extended Output Diagnostic Test Mode (DTM) must be repeated (for example when the time limit of 60 seconds is exceeded) the ignition must be switched off and on again before.
- After completing the Output Diagnostic Test Mode (DTM) the central locking controls are not active until the ignition has been switched off and on again.