Electrical Check

Electrical check, 01V, 5 SPD. A/T (OBD)

The transmission control module is located in front of the right-hand seat under the carpet in footwell.





^ Switch ignition off, release multi-pin connector in direction of arrow, and remove transmission control module.





^ Connect multi-pin connector to the test box VAG 1598/20 -1-, by swinging in -2- and then lock -3-.
Using test box VAG 1598/18 the wiring can be checked according to the wiring diagram.

After electrical checks:





^ Connect multi-pin connector to transmission control module (TCM) -J217- connector housing -1-, by swinging in -2- and then lock -3-.