Rear Lights - Sedan, Assembly

Rear Lights - Sedan from 10.00, Assembly

CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio.


1 - Housing
2 - Gasket
- Replace if damaged
3 - Dual filament bulb for brake and parking light
12V / 21W/ 5W
4 - Dual filament bulb for tail light
12V / 21W /5W
- Tail light only 5W
5 - Bulb holder
6 - Turn signal bulb
12V / 21W
7 - Back-up light bulb socket
- Removing: rear light housing must be removed first.
8 - Back- UP light bulb
12V / 21W
9 - Dual filament bulb for tail light/rear fog light bulb (driver's side only)
12V / 21W