Evaporative Emissions (EVAP) System Components, Removing and Installing

Evaporative Emissions (EVAP) System Components, Removing And Installing







1. Bracket for leak detection pump
- Bolted to body
2. Bolt
3. Washer
4. Leak Detection Pump (LDP) -V144-
- In left rear wheelhousing behind wheelhousing liner
5. Connector
- 3-pin
6. Coupling
- Press together at front to release
7. Connecting hose
- Pressure side
8. Connecting hose
- Suction side
9. Air filter for Leak Detection Pump (LDP) -V144-
10. Connecting piece
11. Connecting pipe
12. EVAP canister
- In spare wheel well on vehicle floor
13. 15 Nm
14. 10 Nm
15. Vent line
16. To Evaporative Emission (EVAP) canister purge regulator valve -N80-
17. Vacuum line
18. Connecting hose
- Vacuum side
19. Connection angle
20. Bracket for leak detection pump
21. 2 Nm
22. 8 Nm