Parts of EVAP Canister System, Removing and Installing

Parts Of EVAP Canister System, Removing And Installing







1. Leak Detection Pump (LDP) -V144-
- Under wheel housing liner in rear left wheel housing
2. 10 Nm
3. Bracket for diagnostic pump
4. Connector
- black, 3-pin
5. Coupling
- Check for secure fitting
- To disengage, squeeze together at front
6. Connection hose
- Pressure side
7. Connection hose
- Intake side
8. Air filter for diagnostic pump
9. Connecting piece
10. Connection tube
11. EVAP canister
- In spare wheel well at vehicle floor
12. 10 Nm
13. To Evaporative Emission (EVAP) canister purge regulator valve 1
- In engine compartment at air filter.
- Check for secure fitting
- secure with spring clamps
14. Ventilation line
- Filler ventilation
- Check for secure fitting
- secure with spring clamps
15. Vacuum line
- to throttle valve control module.
16. Connection hose
- Vacuum side
17. Angled connector