Gear Sets, Adjusting and Markings

Gear sets, adjusting and markings





1. Identification "K831" signifies Klingelnberg gear set with a ratio of 31:8.
2. Gear set pairing number (312).
3. Deviation (tolerance) "r" is based on the test machine master gauge used in the production. The deviation "r" is always given in 1/100 mm. Example: "25" signifies r = 0.25 mm
Ro - Length of test machine master jig used "Ro" = 59.65 mm





R - Actual dimension between ring gear and face of pinion shaft at point with quietest running for this gear set.
Vo - Hypoid offset