Wheel Bearing, Servicing

Wheel Bearing, Servicing
Wheel bearing/wheel hub, removing and installing
Removing
- Remove wheel.





- Remove securing bolts -arrows- from brake caliper housing while counter-holding on guide pins.
- Take off brake caliper housing and secure with wire so that the weight of the brake caliper does not stress or damage the brake hose.
- Remove brake pads.
- Take off disc brake.





- Remove bolts -arrows- for wheel bearing/wheel hub unit.
- Remove wheel bearing/wheel hub unit.

Installing
Install in reverse order.
- Install wheel and tighten.

Tightening torques:
Wheel bearing to rear axle, Refer to Axle/Hub Carrier, Service and Repair, Procedures, Rear Axle With Four Wheel Drive, Assembly Overview, See item 3