Leak Detection Pump: Service and Repair

EVAP System Components, Removing And Installing







1 Bracket
2 8 Nm
3 Disc
4 Bolt
5 Leak Detection Pump (LDP) -V144-
- Under wheelhousing liner in left rear wheelhousing
6 Connector
- Black, 3-pin
7 Connection piece
- Ensure seated tightly
- Press together at front to release
8 Connecting hose
- Suction side
- Ensure seated tightly
- Secure with spring-type clips
9 Connecting hose
- Pressure side
- Ensure seated tightly
- Secure with spring-type clips
10 Connecting piece
11 Air filter for leak detection pump
12 Connector
- Black, 2-pin
13 Vacuum line
- Ensure seated tightly
- Secure with spring-type clips
- to intake manifold upper part Item - 1 -
14 Evaporative Emission (EVAP) canister purge regulator valve -N80-
- Installed location: Arrow points in direction of flow
15 Bracket
- In engine compartment on air filter upper part Item - 14 -
16 Retaining ring
17 Vent line
- Ensure seated tightly
- Secure with spring-type clips
- From junction piece on fuel filler neck Item - 14 -
18 Junction piece
19 Connecting pipe
20 EVAP canister
- In spare wheel well on vehicle floor
21 15 Nm
22 Vacuum line
- Ensure seated tightly
- To intake manifold upper part Item - 5 -.