Evaporative Emissions System

EVAP Canister System, Overview







1. Tank lid unit
- with rubber cap
2. Fuel tank
3. Fuel pump
- Removing and installing
4. Leak Detection Pump (LDP) -V144-*
- Checking
- Under wheel housing liner in rear left wheel housing
5. Air filter for diagnostic pump
6. Vacuum reservoir
- Below front left wheel housing liner
7. Check valve
8. Throttle Valve Control Module -J338-*
9. Fuel pressure regulator
10. Fuel rail with fuel injectors
11. Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-*
- Installation position: Arrow points in direction of flow
12. Fuel filter
- Installation position: Arrow points in direction of flow
13. EVAP canister
- In spare wheel well at vehicle floor