01V, 5 SPD. A/T (FWD)

Speedometer vehicle speed sensor -G22- and Vehicle speed sensor -G68-, replacing, 01V, 5 SPD. A/T (FWD)

Removing
- Remove left wheel.
- Remove left-hand drive axle protective plate.





- Pull connector -arrow A- off sensor.
- Press down sensor retaining catch and turn -arrow-.
- Pull out sensor.

Installing
Install in reverse order but note following:





- Replace O-rings -arrows-.
- Lubricate O-rings with gear oil before inserting.
- Insert sensor.
- Engage retaining catch on bearing bracket for flange shaft.
- Remove left wheel.