Scan Tool Testing - 01V, 5 SPD. A/T (FWD)

VAS 5051 Vehicle Diagnostic, Testing and Information System, connecting and selecting functions, 01V, 5 SPD. A/T (FWD)

Special tools and equipment

VAS 5051 tester:

^ VAS5051/1 or VAS5051/3 diagnostic cable

WARNING:
^ Test equipment must always be secured on the rear seat during a road test.
^ Drivers must NEVER operate these tools while driving.

Vehicles up to 09.00





- Remove cover over Data Link Connector (DLC) at right, next to parking brake lever.
- Connect VAS5051 tester to Data Link Connector (DLC) using VAS5051/1 or VAS5051/3 diagnostic cable with ignition switched off.

Vehicles as of 10.00





^ Connect VAS5051 tester to Data Link Connector (DLC) using VAS5051/1 or VAS5051/3 diagnostic cable with ignition switched off.

Continuation for all vehicles





- Switch on tester (arrow).

The tester is ready for operation when it displays the image (photo) of a vehicle.
- Switch on ignition.
- Touch the field / the button on the screen: Guided Fault Finding.
- Select one after another:
^ Brand
^ Model
^ Model year
^ Version
^ Engine identification

- Confirm the entered data.
Wait until tester has checked aft control modules installed in the vehicle.

- Press the Go To button and select the "Function/component selection" function.

Note: Now, follow the displays on screen to begin the desired functions.