Fog/Driving Lamp: Service and Repair

Fog Lamps From 10.00, Removing And Installing

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.







- Unclip trim from center outwards, and remove -arrow-.







- Remove screws -arrow-.
- Pull out fog lamp assembly from bumper and disconnect electrical connection.

Installing
Install in reverse order of removal, noting the following:







- First tighten screw -1- to 1.5 Nm, then -2- and -3-.

Tighten left fog light in mirror image.
- Check fog lamp aim.