Speedometer Sensor and Drive Wheel, Replacing

Speedometer sensor and drive wheel, replacing
Speedometer Vehicle Speed sensor (VSS) -G22-, replacing
(Transmission installed)

Special tools and equipment





^ VAG 1331 Torque wrench





^ VAG 1332 Torque wrench

- Remove left wheel.
- Remove left axle shaft protective plate (if equipped).





- Disconnect connector from sensor -B-.
- Press retaining clip down turn sensor sideways and pull out upward.
- When installing] replace O-ring -A-.

Note: Handle the sensor carefully. If damaged it is possible that the speedometer will not indicate exactly.