Clutch Pedal Switch F36 Checking/Adjusting

Clutch Pedal Switch F36 checking/adjusting, 012/01W, 5 SPD. M/T
^ Clutch pedal not operated.





^ Check adjustment of switch - 1 - above clutch pedal as follows:

Switch - 1 - must contact clutch pedal - 4 -.

Maximum gap dimension - a - at switch - 1 - is 0.5 mm.

Securing clip - 2 - must contact mounting bracket - 3 -, maximum permitted distance - b - is 0.5 mm.
^ To adjust switch, hold securing clip - 2 - and turn switch.

When adjusting, clutch pedal must not be operated.

In order to assure sufficiently secure fitting, switch must not be installed more than once.