Clutch Pedal Switch F36, Checking/Adjusting

Clutch Pedal Switch F36, checking/adjusting, 01A, 5 SPD. M/T (AWD)
^ Clutch pedal is not operated.





^ Check adjustment of switch - 1 - above clutch pedal as follows:

Switch - 1 - must make contact on clutch pedal - 4 -.

The required gap dimension - a - at switch - 1 - is maximum 0.5 mm.

Retaining clip - 2 - should make contact at mounting bracket - 3 -, a distance - b - is permissible up to a maximum 0.5 mm.

^ To adjust switch, retaining clip - 2 - must be held firmly in place and switch rotated.

While adjusting, clutch pedal must not be operated.

In order to assure sufficiently secure seating, switch must not be installed more than once.

^ Install storage compartment on drivers side.