Oil Pump, Removing and Installing

Oil pump, removing and installing
Special tools and equipment





^ VAG 1331 Torque wrench (5...50 Nm)
^ 3 mm diameter drill bit

Removing
^ Remove lower sump





^ Remove oil line -2-.
^ Lock chain tensioner -1- using a 2.5 mm drill bit (arrow) and remove tensioner.
^ Remove oil pump -3-.

Installing
Installation is performed in reverse order.
^ Tighten oil pump bolts to 20 Nm.
^ Tighten chain tensioner bolts to
M6 = 8 Nm
M8 = 20 Nm
and then remove drill.
^ Tighten oil line banjo bolts to 20 Nm and securing bolts to 8 Nm.
^ Install lower sump