Interior Button For Central Locking, Removing and Installing

Interior Button For Central Locking, Removing And Installing

NOTE: Switch removal and installation procedure is the same for all switches in all locations as described below

CAUTION: When removing switches, lights or displays, prevent damage to visible areas of the vehicle interior by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).

Removing
- Switch off all electrical consumers, switch off ignition and remove ignition key.
- Remove appropriate door trim







- Disconnect electrical connection -arrow-.







- Release locking lugs -arrows- and remove switch.

Installing
Install in reverse order of removal.