Cylinder Head Assembly: Specifications

Fastener Tightening Specifications





• 1 Always replace

Cylinder Head Cover Bolt Tightening Sequence and Specification





- Tighten the bolts - 1 through 16 - in the sequence shown to 10 Nm.

Cylinder Head Bolt Tightening Sequence and Specification





- Tighten the cylinder head bolts in the sequence shown, in four passes as follows (- arrow - points in driving direction).

1 - Tighten using torque wrench

First pass = 30 Nm

Second pass = 60 Nm

2 - Tighten further using a ratchet

Third pass = 1/2 additional turn (180°)

Final pass = 1/2 turn (180°)