Oil Pump: Service and Repair

Oil Pump Assembly Overview





1 8 Nm + 1/4 turn (90°)

2 Oil return line

3 Gasket

• Replace if damaged.

4 Oil pump

• Loosening return connections, refer to --> [ Loosening Return Connections of Oil Pump ]

• To remove, slide slightly in direction of engine management side after loosening all mounts and remove.

5 10 Nm

6 Baffle plate

7 Slide block

8 Baffle plate

9 20 Nm + 1/4 turn (90°)

Loosening Return Connections of Oil Pump





- Pull out securing clips - A - in direction of arrow and slide connecting pieces in direction of arrow - B -.