Cylinder Head Torque & Sequence/Head Bolt Reuse/Replace

Cylinder Head

Note
^ Replace bolts

1. Tighten using torque wrench:
Stage I = 30 Nm
Stage II = 60 Nm
2. Tighten further using a solid wrench
Stage III = 1/2 turn (180°)
Stage IV = 1/2 turn (180°)

Intake Manifold bolt 20 Nm

Camshaft Bearing Caps 8 Nm + 1/4 turn (90°)

Bolt for Camshaft Gear
Stage 1 60 Nm
Stage 2 150 Nm
Stage 3 1/4 additional turn (90°)