Operating Lever

Hood


Operating Lever

Removing





- Activate operating lever - 1 - in - direction of arrow - and open lid.

- Pull the operating lever - 1 - on the A-pillar lower trim - 3 - approximately 2 cm.

- Insert a small screwdriver into gap between operating lever - 1 - and clip - 2 -.

- Release operating lever again and unclip the clip from operating lever.

Installation





- Engage clip - 2 - completely into operating lever - 1 -.

- Then, press operating lever onto mount in mounting bracket.

• Before closing the hood, test the release lever and the release.