Tightening Torque & Sequences

CYLINDER HEAD

Cylinder Head Bolt Tightening Sequence





Tighten all bolts to 30 Nm.
Then tighten bolts to 50 Nm.
Tighten all bolts (1/4 turn) (90°)
Tighten all bolts again 1/4 turn (90°)

INTAKE MANIFOLD
Intake manifold to cylinder head bolt 13 Nm
Intake manifold to support bolt 20 Nm

CAMSHAFT BEARING CAP

Camshaft Bearing Cap Nut 5 Nm + 45 degrees turn

ROD BEARING CAP

Connecting rod bearing cap 30 Nm + 1/4 turn (90°)

CRANKSHAFT PULLEY

Vibration Damper Bolt 100 Nm + 180 degrees Turn

FLYWHEEL/FLEX PLATE

Tighten drive plate on crankshaft with at least 3 old securing bolts to 30 Nm.

Measure dimension - a - using depth gauge : Specified value: 21.0 to 23.0 mm





Tighten the bolts to 60 Nm + 90° (1/4 turn) (the additional turn can be done in several steps).

OIL PUMP

Oil Pump Bolt 23 Nm

WATER PUMP

Coolant Pump bolt 9 Nm