Roof Display Module -J702-, Removing and Installing

Roof Display Module -J702-, Removing And Installing

Removing

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.







- Using appropriate screwdriver, carefully unclip rear portion of roof console trim from areas indicated with -arrows-.







- Using appropriate screwdriver, carefully unclip both sides of display unit in area indicated with -arrow-.







- Unclip and pull up red connector lock in direction of -arrow-.







- Lift connector lock in direction of -arrow- and disconnect electrical connection.

Installing
- Install in reverse order of removal.